Parts of this page are still under construction. Thank you for your patience
|
3B Visalia
- 15-1/2" Seat
- 3B Visalia Tree 90 Degree Bars
- 3/4 Position Single Rigging
- 28" Tapaderos
- Partial Flower Carved w/Carlos Boarder
- Sterling Silver Conchos and Rope Strap Buckle by Scot Hardy
- Angora Saddle Pockets
Click On Any Image for a Close Up
|
|
|
Partial Basket Stamped Wade Saddle
- 15-1/2" Seat
- John Watsabaugh Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Tall x 12-1/2" Wide Cantle
- 3" x 4-1/2" Wood Post Horn
- Stainless Steel Hardware
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4" Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
Click On the Images Below For Close Ups
|
|
|
Association Basket Stamped Saddle
This saddle features Partial
basket stamping with a very fine (smaller & detailed) basket
stamp, and a mixed flower carved basket sampted cantle back.
- 15-1/2" Seat
- John Watsabaugh Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Tall x 12-1/2" Wide Cantle
- 3" x 3-1/2" Wood Post Horn
- Stainless Steel Hardware
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4" Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
Click On the Images Below For Close Ups
|
|
|
Partial Basket Wade
This saddle features Partial
basket stamping with a very fine (smaller & detailed) basket
stamp.
- 15-1/2" Seat
- John Watsabaugh Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle
- 3-1/2" Tall x 5" Wide Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4" Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
Click On the Images Below For Close Ups
|
|
|
Modified Association
Other Features Include:
- 15-1/2" Seat
- Rick Reed Tree 90 Degree Bars
- 4-1/2" Cantle
- 3"x3-1/4" Horn
- 13-" Swell
- Stainless Steel Hardware
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- Stirrups
- 4" Back Cinch
- Partial Mixed Flower Carving
- Roughout Seat
- Cincha Length of Choice
Click On the Images Below For Close Ups
|
|
|
Stockman's Will James
Other Features Include:
- 16" Seat
- Will James Tree
- 4"x12" Cantle, w/ Cheyenne Roll
- 13-1/2" Swell
- Stainless Steel Hardware
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4" Leather Lined Monel Stirrups
- 4" Back Cinch
- Cincha Length of Choice
Click On the Images Below For Close Ups
|
|
|
|
Roughout Wade
Other Features Include:
- 15-1/2" Seat
- Warren Wright Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle, w/ Cheyenne Roll
- 3-1/2" Tall X 5" Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4 Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
- Cincha Length of Choice
|
|
|
Full Flower Tooled Wade
Featuring the Hawiian Plumeria FlowerOther Features Include:
- 15-1/2" Seat
- Rick Reed Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle
- 3-1/2" Tall x 5" Wide Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4" Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
- Cincha Length of Choice
- Conchos by John Mincer
|
|
|
Roughout Wade
Other Features Include:
- 15-1/2" Seat
- Rick Reed Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle, w/ Cheyenne Roll
- 3-1/2" Tall X 5" Horn
- Stainless Steel Harwood Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4 Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
- Cincha Length of Choice
|
|
|
Half Breed Flower Carved Wade
This saddle features a water lilly floral design.
Other Features Include:
- 15-1/4" Seat
- Quality Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle, w/ Cheyenne Roll
- 3-1/2" Tall Horn, 3-1/2" x 4" Cap
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4 Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
- Cincha Length of Choice
- Conchos by JWP
|
|
|
Partial Tooled Wade
Other Features Include:
- 15-3/4" Seat
- Rick Reed Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Cantle
- 3-1/2" Tall x 5" Wide Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 4 Leather Lined Monel Stirrups
- Mule Hide Horn Wrap
- 4" Back Cinch
- Two Long Latigos
- Cincha Length of Choice
- Conchos by JWP
|
|
|
Full Basket
Stamped Wade
This Saddle Features:
- 15-1/2" Padded Seat
- Warren Wright Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Tall x 12" Wide Cantle w/Cheyenne Roll
- 3" Tall x 4"Wide Latigo Wrapped Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 100% Mohair Cinch
- 4" Monel Stirrups
- Hand Engraved Solid Sterling Silver Conchos, Horn
Cap, and stirrup buckles.
|
|
|
Full Flower
Tooled Wade
This Saddle Features:
- 16" Padded Seat
- Warren Wright Tree 90 Degree Bars
- 7/8 Position Flat Plate Rigging
- 4" Tall x 12" Wide Cantle w/Cheyenne Roll
- 3" Tall x 4"Wide Latigo Wrapped Horn
- Stainless Steel Hardware
- Cross Over Rope Strap
- Wrapped and Turned Stirrup Leathers
- Blevins Buckles
- 100% Mohair Cinch
- Monel Stirrups
- Hand Engraved Solid Sterling Silver Conchos and Rope
Strap Buckle
|
|
|
Best of Show ~
Trappings of Texas Saddles & Leatherwork, Alpine, TX. 2008
Winner ~ of the Don King Memorial Saddle Contest,
Sheridan, WY. 2008
Click Below for detailed images.
|
|
|
We recently had the opportunity to make this very nice
roughout saddle for a good cowboy, who is ridding for a
grazing association in western Colorado. This saddle is
designed for all day use and this cowboy will put it to the
test.
Notice the sterling silver cantle concho. All of our silver
is custom made here in our shop.
Click Below for detailed images.
|
|
|
This saddle was ordered for a customer in appreciation
for his many years of work on the SWENSON RANCH in
Throckmortin, Texas.
Jerry had his choice ..and chose
a Will James tree for his saddle. Jerry is a big guy so
this saddle was built on a 17" tree, notice the historic
ranch brand that was tooled into the fender, it was an
honor to build this saddle given to a cowboy who had
spent so much time" horse back "working for a good cow
outfit.....
We would like to thank Jerry for the privilege to
build him this one of a kind saddle please feel free to
contact us for all you special saddle needs .
Click Below for detailed images.
|
|
|
We like it when you our "CUSTOMER' comes to us with a
special project ..... This saddle is one of three that a
gentleman came to us and commissioned our shop to create. It
is an honor when we can build something special for you.....
This particular flower that was used in the tooling design
on this saddle was chosen for its origination in the country
of Peru this saddle will be ridden on a majestic PERUVIAN
PASOVINO STALLION hence the name of the flower is THE MARVEL
OF PERU. This saddle will compliment both the horse and
rider.
It is the goal of a custom shop such as LJ's SADDLERY to
create individual works for each and every customer. Please
contact us for your special needs.
Click Below for detailed images.
|
|
|
Sometimes we get the opportunity to build something a little
bit out of the ordinary and this past February was our
chance. My good friend Terry Evans who lives in the
beautiful Santa Ynez Valley in California asked me to build
him two wonderful Briefcases.
One for his personal use and one for a fundraiser for his
camp in the famous group "The Rancheros Vistatores" .The
Rancheros Vistadores ride is one of the most famous and
prestigious rides in the United States and dates to the
early 1900s We hope you can see the beauty and the varied
array of flowers used in the tooling design.
Please feel free to call us to order one of these beautiful
cases
Click on Any Image for a
Close Up. |
|
|
Pictured here is a saddle we
recently built for Bubba Withers.
We would like to thank Bubba Withers of the 6666's ranch in
Guthrie Texas for allowing us to build this nice rough out
wade for him.
Thanks again Bubba.
Click Below for detailed images. |